mirror of
https://github.com/wessel-novacustom/clevo-keyboard.git
synced 2024-11-15 03:34:01 +01:00
a96de8b994
With warnings on DKMS builds (mention the potential for vermagic conflicts if step 1 & 2 are done on the same build), and recommend skipping straight to the DKMS option on systems where DKMS is present. Future proposal: Create a makefile to automate the DKMS setup in one step.
201 lines
4.2 KiB
Markdown
201 lines
4.2 KiB
Markdown
# Table of Content
|
|
- <a href="#description">Description</a>
|
|
- <a href="#building">Building and Install</a>
|
|
- <a href="#install">Install</a>
|
|
- <a href="#using">Using</a>
|
|
- <a href="#sysfs">Sysfs</a>
|
|
- <a href="#kernelparam">Kernel Parameter</a>
|
|
- <a href="#modes">Modes</a>
|
|
|
|
# Description <a name="description"></a>
|
|
TUXEDO Computers Kernel module for keyboard backlighting.
|
|
|
|
Additions
|
|
- Sysfs interface to control the brightness, mode, color, on/off state
|
|
- DKMS Ready
|
|
- Full RGB Color Support
|
|
- WMI Support for switch over the FN-Keys
|
|
|
|
# Building and Install <a name="building"></a>
|
|
|
|
## Dependencies
|
|
- make
|
|
- gcc
|
|
- linux-headers
|
|
- dkms (Only when use this module with the DKMS functionality)
|
|
|
|
## Warning on installing the module:
|
|
|
|
Use either method only. Do not combine installation methods, such as starting with the build step below and proceeding to use the same build artifacts with the DKMS module. Otherwise the module built via dkms will fail to load with an `exec_format` error on newer kernels due to a mismatched version magic.
|
|
|
|
This is why the DKMS build step begins with a `make clean` step.
|
|
|
|
For convenience, on platforms where DKMS is in use, skip to the DKMS section directly.
|
|
|
|
## Build the Module
|
|
|
|
```sh
|
|
make clean && make
|
|
```
|
|
|
|
## The DKMS route:
|
|
|
|
### Add as DKMS Module:
|
|
|
|
At first point add the Module
|
|
```sh
|
|
make clean
|
|
sudo cp -R . /usr/src/tuxedo_keyboard-1
|
|
sudo dkms add -m tuxedo_keyboard -v 1
|
|
```
|
|
|
|
The secound step is compile the module
|
|
```sh
|
|
sudo dkms build -m tuxedo_keyboard -v 1
|
|
```
|
|
|
|
Install the DKMS module
|
|
```sh
|
|
sudo dkms install -m tuxedo_keyboard -v 1
|
|
```
|
|
|
|
Load the module with modprobe
|
|
```sh
|
|
modprobe tuxedo_keyboard
|
|
```
|
|
|
|
### Uninstalling the DKMS Module:
|
|
|
|
Remove the dkms module
|
|
```sh
|
|
sudo dkms remove -m tuxedo_keyboard -v 1 --all
|
|
```
|
|
|
|
Remove the source
|
|
```sh
|
|
sudo rm -rf /usr/src/tuxedo_keyboard-1
|
|
```
|
|
|
|
# Using <a name="using"></a>
|
|
|
|
## modprobe
|
|
|
|
```sh
|
|
modprobe tuxedo_keyboard
|
|
```
|
|
|
|
## Load the module on boot:
|
|
|
|
Add Module to /etc/modules
|
|
```sh
|
|
sudo su
|
|
echo tuxedo_keyboard >> /etc/modules
|
|
```
|
|
|
|
Default Parameters at start.
|
|
|
|
|
|
In this example, we start the kernel module with the following settings:
|
|
|
|
- mode 0 (Custom / Default Mode)
|
|
- red color for the left side of keyboard
|
|
- green color for the center of keyboard
|
|
- blue color for the right side of keyboard
|
|
|
|
Note that we write its' settings to a `.conf` file under `/etc/modprobe.d` named `tuxedo_keyboard.conf`.
|
|
|
|
```sh
|
|
sudo su
|
|
echo "options tuxedo_keyboard mode=0 color_left=0xFF0000 color_center=0x00FF00 color_right=0x0000FF" > /etc/modprobe.d/tuxedo_keyboard.conf
|
|
```
|
|
|
|
# Sysfs <a name="sysfs"></a>
|
|
|
|
## General
|
|
Path: /sys/devices/platform/tuxedo_keyboard
|
|
|
|
## color_left
|
|
Allowed Values: Hex-Value (e.g. 0xFF0000 for the Color Red)
|
|
Description: Set the color of the left Keyboard Side
|
|
|
|
## color_center
|
|
Allowed Values: Hex-Value (e.g. 0xFF0000 for the Color Red)
|
|
Description: Set the color of the center of Keyboard
|
|
|
|
## color_right
|
|
Allowed Values: Hex-Value (e.g. 0xFF0000 for the Color Red)
|
|
Description: Set the color of the right Keyboard Side
|
|
|
|
## color_extra
|
|
Allowed Values: Hex-Value (e.g. 0xFF0000 for the Color Red)
|
|
Description: Set the color of the extra region (if exist) of the Keyboard
|
|
|
|
## brightness
|
|
Allowed Values: 0 - 255
|
|
Description: Set the brightness of the Keyboard
|
|
|
|
## mode
|
|
Allowed Values: 0 - 7
|
|
Description: Set the mode of the Keyboard. A list with the modes is under <a href="#modes">Modes</a>
|
|
|
|
## state
|
|
Allowed Values: 0, 1
|
|
Description: Set the State of keyboard, 0 is keyboard is off and 1 is keyboard is on
|
|
|
|
## extra
|
|
Allowed Values: 0, 1
|
|
Description: Only get the information, if the keyboard have the extra region
|
|
|
|
# Kernel Parameter <a name="kernelparam"></a>
|
|
|
|
## Using
|
|
```sh
|
|
sudo modprobe tuxedo_keyboard <params>
|
|
```
|
|
|
|
## color_left
|
|
Set the color of the left Keyboard Side
|
|
|
|
## color_center
|
|
Set the color of the left Keyboard Side
|
|
|
|
## color_right
|
|
Set the color of the left Keyboard Side
|
|
|
|
## color_extra
|
|
Set the color of the left Keyboard extra region (Only when is a supported keyboard)
|
|
|
|
## mode
|
|
Set the mode (on/off) of keyboard
|
|
|
|
## brightness
|
|
Set the brightness of keyboard
|
|
|
|
## state
|
|
|
|
# Modes <a name="modes"></a>
|
|
|
|
## CUSTOM
|
|
Value: 0
|
|
|
|
## BREATHE
|
|
Value: 1
|
|
|
|
## CYCLE
|
|
Value: 2
|
|
|
|
## DANCE
|
|
Value: 3
|
|
|
|
## FLASH
|
|
Value: 4
|
|
|
|
## RANDOM_COLOR
|
|
Value: 5
|
|
|
|
## TEMPO
|
|
Value: 6
|
|
|
|
## WAVE
|
|
Value: 7
|